رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Any acceptable
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
36.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
10.000 feet
Distance From First Hole Centerline To End Along Length:
0.187 inches
Distance From First Hole Centerline To End Along Width:
0.312 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.0410 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Round
MRC:
The length of a straight line which passes through the center of the opening,and terminates at the circumference.AKSV
Perforation Diameter:
0.125 inches
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Any acceptable
Perforation Center To Center Distance Along Upward Slope:
0.187 inches
MRC:
The means used to level the item.BRDT
Leveling Method:
Roller
MRC:
The weight of the item with respect to a unit of measure.BRFD
Weight Per Unit Measure:
0.564 pounds per square foot
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
16000 pounds per square inch
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
14000 pounds per square inch
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
H-14 strain hardened, 1/2 hard
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, qq-a-250/1
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 1100
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/1 federal specification 1st material response
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
H14 temper
