رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Hot rolled or extruded
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
14.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
1.333 feet
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.1520 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
14.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Solid
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Any acceptable
MRC:
The weight of the item with respect to a unit of measure.BRFD
Weight Per Unit Measure:
Any acceptable
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
Not rated
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
Not rated
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
Hard
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Copper, qq-c-502
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 110 or copper alloy 122 or copper alloy 125 or copper alloy 142 or copper alloy 102 or copper alloy 104 or copper alloy 105 or copper alloy 107 or copper alloy 114 or copper alloy 116 or copper alloy 120 or copper alloy 121 or copper alloy 123 or copper alloy 130 or copper alloy 128 or copper alloy 127
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-502 federal specification 1st material response
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Sheet form and hard temper
