رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 1.883 inches and 1.893 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
1.828 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.156 inches
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.750 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
1.000 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
9.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.813 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
Between 1.551 inches and 1.561 inches
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
38.0
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
8.250 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron, cast
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
3.500 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight spline or involute spline
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
3.0688 inches
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
3
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Included
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
1.6875 inches
MRC:
Indicates the location of the counterbore on the item.BDYS
Counterbore Location:
Bb end
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
Hub End Outside Diameter And Location:
2.498 inches aa end and 2.499 inches aa end and 2.250 inches bb end
Distance From Outside Flange/rim To Hub End And Location:
3.313 inches aa end and 3.688 inches bb end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
