رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.129 inches both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.4520 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.5000 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.063 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.438 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.0634 inches both ends
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.0400 inches both ends
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
11 both ends
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
No. 10-32 /0.190 in./ both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.3130 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.8130 inches second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight second end
MRC:
Indicates the design type of the item.APGF
Design Type:
Insert
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.813 inches both ends
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway both ends
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole first end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: located 180 degrees from keyway
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
1 both ends
MRC:
Indicates the location of an unthreaded hole on the item.BSNW
Unthreaded Hole Location:
Both ends: located through hub portion of coupling
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway
MRC:
The chemical compound or mechanical mixture properties of which the insert is fabricated.CQZG
Insert Material:
Copper alloy
