رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
rw3400-83gal-kit
معلومات الجزء
Polyurethane coating
TXT
وصف:
Polyurethane Coating
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
B2 acft
MRC:
The means by which the element,compound,mixture,or the like,is applied.AHEE
Application Method:
Spraying after thinning
MRC:
The number of the volume,form,or the dosage within each unit package.AKKF
Quantity Within Each Unit Package:
1.000 gallons
MRC:
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.BBRG
Storage Type:
Temperature controlled warehouse
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Flammable
MRC:
The designator or term used to identify the gloss.CBGR
Gloss Designation:
Flat
MRC:
The minimum percent of nonvolatile material included in the item.CBHC
Nonvolatile Material Minimum Percentage:
10.0
MRC:
Indicates the type of basic formulation composing the item.CCSD
Basic Formulation Type:
Polyurethane
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
One gallon kit which is one gallon part a, 2 qrt part b. 2 qrt part c=7800 gram kit. Contains methyl isobutyl ketone-reportable under clean air act. 3 part kit part a accelerator, b resin, c thinner. Keep in well ventilated area. High temp may cause build up-component b and c may explode in closed container. Flashbacks possible due to heavier than air. 8 hr drying time.
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Gray and orange-yellow
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
0g1z3-rw3400-83 standard (includes industry or association standards, individual manufactureer standards, etc.).
