رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
s-3-s-15-35-1081-ht1.87in
TXT
وصف:
Packing Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Angle bottom ring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
2.500 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
3.125 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
250.0 degrees fahrenheit
MRC:
The number of rings between the top and bottom rings.ADTH
Intermediate Ring Quantity:
4
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.940 inches and 1.060 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cotton bottom ring and rubber chloroprene class cr bottom ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cotton intermediate ring and rubber chloroprene class cr intermediate ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cotton top ring and rubber chloroprene class cr top ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
1081 fscm 73277 mfr ref single material response bottom ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
1081 fscm 73277 mfr ref single material response intermediate ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
1081 fscm 73277 mfr ref single material response top ring
