رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Outer edges chamfered0.005 in. Min, 0.020 in. Maximum by 40 degrees min and 50 degrees max
TXT
وصف:
Packing Retainer
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Special
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.175 inches and 0.185 inches
Outer Groove Depth:
Between 0.0193 inches and 0.0250 inches
Outer Groove Width:
Between 0.095 inches and 0.125 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 0.2542 inches and 0.2552 inches
Peripheral Diameter:
Between 0.3535 inches and 0.3550 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/8, comp 6061-to federal specification single material response or qq-a-200/8, comp 6061-to federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 military specification single treatment response
