رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
0.125 in. Diameter pin included
TXT
وصف:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Relieved
Concentric Hole Depth:
0.630 inches
Concentric Hole Diameter:
0.062 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.980 inches and 1.012 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.434 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.402 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
0.250 inches
Second Diameter From Wrenching Feature:
0.190 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.188 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
0.438 inches
First Radial Fluid Hole Diameter:
0.062 inches
Distance From First Radial Hole Center To End Of Bolt:
0.530 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
0.840 inches
Wrenching Feature Height:
Between 0.140 inches and 0.172 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The angle of the end surface upon which the mated surface seats.CQPR
First End Seat Angle:
45.0 degrees
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 431
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-18732 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
