رقم الجزء S6135-20714-1

Key Washer

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 76.66 and 103.491 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
s6135-20714-1
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
000109916

معلومات الجزء
0.359 in. Long by 0.141 in. Wide slot in each key

NSN
رقم المخزون الوطني:
5310-00-010-9916 5310000109916
TXT
وصف:
Key Washer
INC
INC
رمز اسم العنصر:
01869
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.750 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.045 inches and 1.051 inches
MRC:
None.ABKX
External Straight Key Length:
0.375 inches
MRC:
None.ABLC
External Straight Key Width:
0.370 inches
MRC:
A measurement taken at right angles to the length of an external keyway,in distinction from thickness.ABLL
External Keyway Width:
0.150 inches
MRC:
None.ABLX
Overall Distance Including Keys:
1.750 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.063 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 40.0 rockwell c and 45.0 rockwell c
MRC:
None.CSFW
Angle Between External Keys:
180.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
100.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1095
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-7947 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Key

{lang[cimilar]} Key Washers

« Nuts and Washers {lang[catalog]}
قارن الآن»
واضح | أخفى