رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
High writing speed and versatile triggering
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac and dc
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Signal collection system an/gsq- 212
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
400.0 volts and 250.0 volts
MRC:
The number of beams provided on the item.ATES
Beam Quantity:
2
MRC:
The means of attaching the item.AXGY
Mounting Method:
Cabinet w/complete hardware for rack
MRC:
The acceptable limits of deviation from the designed standard output value of the item,expressed in percent.BDJD
Accuracy Range In Percent:
-3.0/+3.0
MRC:
Designates the relative or proportionate dimensions of the screen.BGQK
Screen Size:
2.0 x 2.5 inches
MRC:
An indication of whether or not sweep circuits are included.BGQL
Sweep Circuits:
Included
MRC:
Indicates the type of sweep circuits provided.BGQN
Sweep Circuit Type:
Any acceptable
MRC:
The range of complete cyclic changes,per unit of time,for which the sweep is rated.BGQP
Sweep Frequency Range:
+0.0/+80.0 megahertz
MRC:
The length of time consumed by a single trigger sweep.BGQQ
Single Trigger Sweep Duration:
Between 50.0 nanoseconds and 0.2 seconds
MRC:
The maximum absolute value for which the trigger sweep voltage is rated.BGRZ
Trigger Sweep Voltage Amplitude Rating:
250.0 volts
MRC:
An indication of whether or not a trigger sweep polarity switch is included.BGSB
Trigger Sweep Polarity Switch:
Not included
MRC:
The distance between indicated pulse intervals shown on the screen of a trigger sweep designed item.BGSC
Trigger Sweep Marker Intervals:
20 msec and 50 nsec
MRC:
An indication of whether or not an expanded sweep is provided.BGSD
Expanded Sweep:
Not provided
MRC:
An indication of whether or not provisions for rating the deflection sensitivity through the amplifier are provided.BHDD
Amplifier Deflection Sensitivity Provision:
Provided
MRC:
An indication of whether or not an input intensity modulation feature is provided.BHDH
Input Intensity Modulation Feature:
Provided
MRC:
The peak to peak value for which the item is calibrated.BHFB
Calibrating Peak To Peak Amplitude:
Between 5.0 millivolts and 10.0 volts
MRC:
The number of measurement ranges included.BHFC
Measurement Range Quantity:
8
MRC:
An indication as to the measurement capabilities of the range or ranges.BHFD
Measurement Range Steps:
Continuously variable; at least 2.5: 1 range; 25 v/div
MRC:
An indication of whether or not a calibrated screen scale is included.BHFF
Calibrated Screen Scale:
Not included
MRC:
An indication of whether or not a trace storage tube is included.BHFH
Trace Storage Tube:
Not included
MRC:
The value,or range of values,for which the viewing screen is rated.BHFQ
Viewing Screen Voltage Rating:
250.0 volts
MRC:
An indication of whether or not trace erasing provisions are provided.BHFR
Trace Erasing Provision:
Not provided
MRC:
An indication of whether or not camera recording device accommodations are provided.BHFT
Camera Recording Device Accommodation:
Not provided
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
General purpose 80 mhz dual traceoscilloscope designed to operate in 2 compartments of a tm500 series power module
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Operating power 26 watts; rise time 4.4 nanoseconds or less; band width measured at -3 db points; mount in standard 19-inch rack; designed forground use
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
80009-sc-504a drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
