رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Valve, solenoid
MRC:
A measurement of the pipe size the item will accommodate.AAAR
Pipe Size Accommodated:
2.500 inches 1st end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand 1st end
MRC:
The position of the moving member/s/ controlling flow through the valve with the solenoid in the de-energized position.ADSK
Flow Control Device Normal Operation Position:
Closed
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
G9 plain, optional en (pipe) 1st end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Plain, optional en (pipe) 1st end
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Automatic
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded internal pipe 1st end
MRC:
The installed position for which the item is designed.BBJX
Mounting Position:
Horizontal or vertical
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
8 1st end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
2.500 inches 1st end
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
24.0 dc
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
temperature 180 degrees feh max; -40 degrees feh ; power consumpti0n 10 watts d.C.; solenoid enclosure exploxion proof nema type vii class i, group d - equipped for 1/2 npt conduit connection, can be rotated; solenoid coil class a continous duty watertight molded; adjustment ranges pressure setting 10 to 40 psi; main valve is cast ison body bronze trim, pilot control is bronze body, stainless stl for the trim; pressure setting unless otherwise specified factory setting is 10 to 40 range set at 20 psi
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Err-090
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight thru
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Npt 1st end
