رقم الجزء SG-2740PC27

Flexible Shaft Coupling

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 5395.13 and 7055.17 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
sg-2740pc27
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
002767312

معلومات الجزء
2 holes on face of driving hub, 1/4-20 tap, 11/16 in. Deep in line with keyway 180 degrees apart; center of holes 7/32 in. From edge of hub; holes used for jacking hub from shaft

NSN
رقم المخزون الوطني:
3010-00-276-7312 3010002767312
TXT
وصف:
Flexible Shaft Coupling
INC
INC
رمز اسم العنصر:
04459
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.063 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
5.935 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
0.9020 inches second end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.6360 inches second end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.7607 inches first end
MRC:
A measurement taken at right angles to the length of a key,in distinction from thickness.ABSF
Key Width:
0.250 inches first end
MRC:
A measurement taken at right angles to the length of a key,in distinction from thickness.ABSF
Key Width:
0.250 inches second end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.2490 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.5630 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.8130 inches first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered second end
MRC:
Indicates the design type of the item.APGF
Design Type:
Internal gear
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 first end
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 second end
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway first end
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway second end
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway and exposed coupling bolt type and standard grid spring and shrouded coupling bolt type
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
1.0000 inches second end

{lang[cimilar]} Flexible Shaft Couplings

« Torque Converters and Speed Changers {lang[catalog]}
قارن الآن»
واضح | أخفى