رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Line Actuating Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Any acceptable
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Unthreaded mounting holes
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees fahrenheit
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
120.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Any acceptable
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Any acceptable
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.500 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Any acceptable
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Any acceptable
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.766 inches
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
9.000 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
10.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Two hole
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
2500.0 pounds per square inch
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
Fork type (clevis)
MRC:
An indication of the similarity of the piston rod ends.CLLP
Piston Rod End Similarity:
Identical
First End Largest Inside Diameter:
0.766 inches
First End Fork Width:
1.500 inches
First End Fork Depth:
1.870 inches
First End Fork Span Width:
0.810 inches
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Fork piston rod end
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
0.750 inches
Center To Center Distance Between Mounting Provisions:
9.000 inches
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
2 center section
