رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Spring 302 stainless steel; gasket silver plated 316 steel; inlet 1/4in. Swagelok w/ 3/4in.Hex facility; outlet 1/4in.O.D. Tube stub w/ 9/16in.Hex facility; orifice 0.187in.O.D; 1.30 sq.In. Effective filter area
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Inlet connection end and outlet connection end
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
2.906 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
0.750 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
15.0
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
10.0 pounds per square inch
MRC:
Indicates the design type of the item.APGF
Design Type:
Limited
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
70.0 degrees fahrenheit
MRC:
The number of filtering elements provided.CCZM
Filtering Element Quantity:
1
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
3000.0 pounds per square inch
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Sintered single filtering media response
MRC:
Indicates the type of connection on the first intake.CRXZ
First Intake Connection Type:
Unthreaded internal tube end
MRC:
Indicates the first discharge connection relationship to an intake connection.CSJR
First Discharge Connection Relationship To Intake Connection:
Not identical
MRC:
Indicates the type of connection on the first discharge.CSKS
First Discharge Connection Type:
Unthreaded external tube end
MRC:
A designation that is used for the purpose of general identification of the outside diameter.CSMP
First Discharge Outside Diameter:
0.750 inches
MRC:
A designation that is used for the purpose of general identification of the inside diameter.CSPN
First Intake Inside Diameter:
0.250 inches
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 316 body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 316 filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air and water
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Inline (hydraulic)
