رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
1.000 in. Hex wrenching facilities; clean by back flushing w/clean solvent
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Inlet connection line and outlet connection line
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
2.188 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
1.000 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
15.0
MRC:
The difference in opposing pressure which an item is capable of withstanding without evidence of deformation or other damage.ADNQ
Differential Pressure:
100.0 pounds per square inch
MRC:
Indicates the design type of the item.APGF
Design Type:
Limited
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -320.0 degrees fahrenheit and 900.0 degrees fahrenheit
MRC:
The number of filtering elements provided.CCZM
Filtering Element Quantity:
1
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
6000.0 pounds per square inch
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Pleated 1st filtering media response
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Woven 2nd filtering media response
MRC:
Indicates the type of connection on the first intake.CRXZ
First Intake Connection Type:
Threaded external pipe line
MRC:
Indicates the first discharge connection relationship to an intake connection.CSJR
First Discharge Connection Relationship To Intake Connection:
Not identical
MRC:
Indicates the type of connection on the first discharge.CSKS
First Discharge Connection Type:
Threaded internal pipe line
MRC:
A designation distinguishing one group of thread diameter-pitch combination from another by the number of threads per measurement scale for a specific diameter.CTDY
First Intake Thread Series Designator:
Npt
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CTFF
First Discharge Thread Series Designator:
Npt
MRC:
A designation that is used for the purpose of general identification of the thread.CTGK
First Intake Thread Size:
0.250 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CTLG
First Discharge Thread Size:
0.250 inches
MRC:
The direction of the thread when viewed axially.a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.CXPF
First Intake Thread Direction:
Right-hand
MRC:
The direction of the thread when viewed axially.a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.CXYG
First Discharge Thread Direction:
Right-hand
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 316 body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 316 filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air or water
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Suction type blunt end
