رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
ss52a0265x0500
معلومات الجزء
Aluminum alloy washers or shims should not be used in severe loading conditions
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.490 inches and 0.510 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 0.260 inches and 0.270 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.120 inches
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
29 and 1
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.003 inches and 0.032 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Separable
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 1100 or aluminum alloy 5052 or aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/1, temper h19 federal specification 1st material response or qq-a-250/8, temper h19 or h39 federal specification 2nd material response or qq-a-250/5 temper 53, t4, t81 or t861 federal specification 3rd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Circular
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
78286-ss52 manufacturers specification
