رقم الجزء ST71M

Knurled Plain Nut

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 112.9 and 152.415 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
st71m
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
100 EA
NIIN:
003141906
NSN
رقم المخزون الوطني:
5310-00-314-1906 5310003141906
TXT
وصف:
Knurled Plain Nut
INC
INC
رمز اسم العنصر:
15886
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the circumference.ABPH
Small End Diameter:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Knurled
MRC:
None.ACTD
Nut Diameter:
1.500 inches
MRC:
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.ADBG
Nut Thickness:
0.781 inches
MRC:
None.ADBK
Knurl Width:
0.188 inches
MRC:
Indicates the type and number of holes provided.ALET
Hole Type And Quantity:
1 tapped
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unf
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.190 inches
MRC:
The number of hole threads per linear inch measured on a line parallel to the thread axis.CQTW
Hole Thready Qty Per Inch (tpi):
10
MRC:
The style designation that most nearly corresponds to the appearance of the hole configuration.CRHC
Hole Configuration Style:
Configuration g
MRC:
The nominal length of a straight line which passes through the center of the threaded hole,and terminates at the circumference.CSPF
Hole Thread Diameter:
0.190 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy r-405
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b-164-41t cl b assn standard single material response

{lang[cimilar]} Knurled Plain Nuts

« Nuts and Washers {lang[catalog]}
قارن الآن»
واضح | أخفى