رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Swaging Rope Terminal
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.141 inches and 0.146 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABHC
Overall Width:
Between 0.875 inches and 0.900 inches
MRC:
A measurement taken at right angles to the length of an opening,in distinction from thickness.ABPP
Opening Width:
Between 0.281 inches and 0.291 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the circumference.ADCS
Plain Shank Diameter:
Between 0.245 inches and 0.250 inches
Length From Pinhole Center To End:
Between 3.062 inches and 3.082 inches
MRC:
The length of a straight line which passes through the center of the accommodated material,and terminates at the circumference.AHNK
Accommodated Material Diameter:
0.125 inches
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
Between 0.250 inches and 0.252 inches
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
1760.0 pounds
MRC:
The distance measured in a straight line from the bottom to the top of an item.CTHX
Overall Height:
Between 0.542 inches and 0.557 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303 or steel comp 305
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Fork
