رقم الجزء T32340

Cylinder Sleeve

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 134.86 and 182.061 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
t32340
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
003209098
NSN
رقم المخزون الوطني:
2815-00-320-9098 2815003209098
TXT
وصف:
Cylinder Sleeve
INC
INC
رمز اسم العنصر:
16756
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.094 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.750 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.250 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
0.250 inches
MRC:
None.ABPA
Undercut Diameter:
4.938 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
4.031 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
3.875 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
5.125 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
5.125 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
4.844 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
The angle of the bottom chamfer,expressed in degrees.AYSK
Bottom Chamfer Angle In Deg:
10.0
MRC:
A measurement of the longest dimension of the bottom chamfer,in distinction from width.AYSM
Bottom Chamfer Length:
0.062 inches
MRC:
An indication of whether or not a valve recess(es) is included.BPPS
Valve Recess:
Not included
MRC:
An indication of whether or not a top inside chamfer is included.BPPT
Top Inside Chamfer:
Included
MRC:
An indication of whether or not a bottom inside chamfer is included.BPPW
Bottom Inside Chamfer:
Included
MRC:
An indication of whether or not a top intake port is included.BPPX
Top Intake Port:
Not included
MRC:
None.BPPY
Largest Outside Diameter Under Flange:
5.188 inches
MRC:
None.BPPZ
Largest Outside Diameter Width Under Flange:
0.250 inches
MRC:
An indication of whether or not an intake hole(s) is included.BQBF
Intake Hole:
Not included
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Dry, flanged, relieved, shouldered, installation chamfer

{lang[cimilar]} Cylinder Sleeves

« Diesel Engines and Components {lang[catalog]}
قارن الآن»
واضح | أخفى