رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Round, threaded
MRC:
Indicates the type and number of integral nut(s) provided.AAAN
Integral Nut Type And Quantity:
1 self-locking lug
MRC:
The environmental elements or conditions that the cushioning is designed or protected to resist or withstand satisfactorily.AAAP
Cushioning Environmental Protection:
Any acceptable
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.625 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.032 inches
MRC:
A measurement taken at right angles to the length of the lug,in distinction from thickness.AHMM
Lug Width:
1.000 inches
Center To Center Distance Between First And Second Holes:
0.500 inches
Center To Center Distance Between Loop And Mounting Hole:
Between 0.575 inches and 0.605 inches
Distance From Loop Center To Tongue End:
0.808 inches
Center To Center Distance Between Loop And Lug Hole:
0.845 inches
MRC:
The length of a straight line which passes through the center of the loop,and terminates at the inside circumference.BZTN
Loop Inside Diameter:
Between 0.360 inches and 0.390 inches
Lug Hole Diameter:
Between 0.173 inches and 0.178 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.190 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1010 band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 3209 assn standard 1st material response cushion or sae sc715 assn standard 2nd material response cushion
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 1, cl 2 federal specification single treatment response band
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Right hand clamp & bracket
