رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Both flanges pressurized; 1st w/ rf/pressure seal and four 0.625 in. Lg screws; 2nd w/ four 1.000 in. Lg screws
TXT
وصف:
Waveguide Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Unable To Decode:
Internal, rectangular double ridged external, rectangular
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Unable To Decode:
Convolute first tubing segment
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Unable To Decode:
Convolute third tubing segment
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Unable To Decode:
Seamless fourth tubing segment
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Unable To Decode:
Convolute fifth tubing segment
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Unable To Decode:
Seamless second tubing segment
MRC:
The style designation indicating the configuration that most nearly corresponds to the construction of the tubing wall.AHRV
Unable To Decode:
Seamless sixth tubing segment
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
2
Flange Inside Width:
0.688 inches all flanges and 0.693 inches all flanges
Flange Inside Height:
0.319 inches all flanges and 0.323 inches all flanges
Flange Outside Width:
1.358 inches all flanges and 1.390 inches all flanges
Flange Outside Height:
1.358 inches all flanges and 1.390 inches all flanges
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.235 inches all flanges and 0.255 inches all flanges
MRC:
The length of a straight line which passes through the center of a flange connecting hole,and terminates at the circumference.AHTN
Flange Connecting Hole Diameter:
0.096 inches all flanges second connection facility
MRC:
The length of a straight line which passes through the center of a flange connecting hole,and terminates at the circumference.AHTN
Flange Connecting Hole Diameter:
0.143 inches all flanges first connection facility and 0.149 inches all flanges first connection facility
MRC:
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.AHTW
Voltage Standing Wave Ratio:
1.65
Waveguide Outside Width:
0.791 inches
Waveguide Inside Width:
Between 0.688 inches and 0.693 inches
Waveguide Inside Height:
Between 0.318 inches and 0.323 inches
Waveguide Outside Height:
0.421 inches
Waveguide Longer Offset Distance:
41.580 inches
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
2 unthreaded hole all flanges second connection facility
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
4 unthreaded hole all flanges first connection facility
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Unable To Decode:
Contact, double ridge type all flanges
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible fifth tubing segment
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible first tubing segment
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid fourth tubing segment
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid second tubing segment
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid sixth tubing segment
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible third tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy fourth tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy second tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy sixth tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy fifth tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy first tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy third tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene all tubing jacket or rubber silicone all tubing jacket
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel all flange outside surfaces
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel fourth tubing segment outside surfaces
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel second tubing segment outside surfaces
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel sixth tubing segment outside surfaces
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Bend type
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
One end marked w/arrow and letters fwd; includes four mtg flanges
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Antennas, waveguides, and related equipment