رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
tip01106-060ct71
TXT
وصف:
Ship Propulsion Shaft
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.500 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
2.626 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
15.083 feet
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.000 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
0.479 feet
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
2.000 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.250 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Smooth machined
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Jam nut, 1, propeller hub key, 1
MRC:
Indicates the type of unit.APQB
Unit Type:
Propeller shaft section
MRC:
The structural characteristic of the item.ARQS
Construction:
Solid
MRC:
The number of threads per specific measurement scale.AZRW
Thread Quantity:
6 per inch
MRC:
Indicates the location at which the item is to be used.BPJZ
Usage Location:
Starboard
MRC:
The design of the forward end.CPHM
Forward End Design:
Straight
MRC:
The length of a straight line which passes through the center of the forward end,and terminates at the circumference.CPHX
Forward End Diameter:
2.000 inches
MRC:
An indication of whether or not a forward end keyway is provided.CPJF
Forward End Keyway:
Not provided
MRC:
An indication of whether or not an after end keyway is provided.CPJG
After End Keyway:
Provided
MRC:
An indication of whether or not a threaded forward end is included.CPNF
Threaded Forward End:
Not included
MRC:
The design of the after end.CPTC
After End Design:
Tapered
MRC:
An indication of whether or not a threaded after end is included.CPTD
Threaded After End:
Included
MRC:
The amount of taper of the item.CTKF
Taper:
0.750 per foot in inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Brass, naval, fed, qq-b-637, composition i, hot rolled
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Brass, naval, fed, qq-b-637, composition i, hot rolled
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated in forward end design
