رقم الجزء TLD2040AR1-4

Drive Shank Hole Forming Cutter
توافر المخزون  رموز حالة المنتج

رقم الجزء tld2040ar1-4 في المخزون بالكميات والشروط التالية.

  • NE: 1

ملاحظة: تم آخر تحديث لتوفر هذا المنتج 08/16/2023 وربما تغيرت منذ ذلك الحين. اطلب عرض أسعار للأسعار المحدثة والتوافر.

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
tld2040ar1-4
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
000546436
NSN
رقم المخزون الوطني:
5133-00-054-6436 5133000546436
TXT
وصف:
Drive Shank Hole Forming Cutter
INC
INC
رمز اسم العنصر:
32727
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Externally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.187 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
0.553 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the cutting end.AKZH
Cutting End Style:
Single end
MRC:
The direction in which the item is designed to rotate in order to cut.AKZV
Cutting Rotation Direction:
Right-hand
MRC:
The specific holder which the item is designed to accommodate.AKZX
Holder Accommodated:
Angle head series taper-lok bolt
MRC:
The length of a straight line which passes through the center of a drill,and terminates at the circumference.ALAM
Drill Diameter:
0.2344 inches
MRC:
None.ALAN
Drill Length:
0.030 inches
MRC:
The number of flutes provided.ALAR
Flute Quantity:
4
MRC:
The number of threads per specific measurement scale.CQRN
Thread Quantity:
28 per inch
MRC:
None.CTHT
Included Angle:
100.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel

{lang[cimilar]} Drive Shank Hole Forming Cutters

« Drill Bits, Counterbores and Countersinks: Hand and Machine {lang[catalog]}
قارن الآن»
واضح | أخفى