رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Line Actuating Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Brass
First End Outside Diameter:
1.000 inches
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Pin
MRC:
A measurement of the longest dimension of a mounting facility,in distinction from width.ABKP
Mounting Facility Length:
2.438 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
4.000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
4.375 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
4.375 inches
MRC:
The direction of the threads of a mounting facility when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AKBN
Mounting Facility Thread Direction:
Right-hand
First End External Thread Length:
1.875 inches
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
40.312 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
70.312 inches
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
Between 150.0 pounds per square inch and 350.0 pounds per square inch
MRC:
The number of threads on the mounting facility per linear inch measured on a line parallel to the thread axis.CDTG
Mounting Facility Thready Qty Per Inch (tpi):
12
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Hydraulic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
External threaded
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the first piston rod end.CKSG
First Piston Rod End Thread Series Designator:
Unf
MRC:
The length of a straight line which passes through the center of the first piston rod end which would bound the crest of an external thread or the root of an internal thread.CKSH
First Piston Rod End Thread Diameter:
1.000 inches
MRC:
The number of screw threads on the first piston rod end per linear inch measured on a line parallel to the thread axis.CKSJ
First Piston Rod End Thready Qty Per Inch (tpi):
14
MRC:
The direction of the first piston rod end thread when viewed axially. a right-hand thread winds in clockwise direction while a left-hand thread winds in a counterclockwise direction.CKSL
First Piston Rod End Thread Direction:
Right-hand
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Tongue cylinder head end
MRC:
The length of the threaded portion of the mounting facility.CLMN
Mounting Facility Thread Length:
2.000 inches
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
2 center section
