رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
0.250-28 threaded hole in one end
TXT
وصف:
Headless Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.516 inches and 3.547 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 1.246 inches and 1.248 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 3.090 inches and 3.110 inches
Undercut Diameter:
Between 1.191 inches and 1.199 inches
Undercut Width:
Between 0.056 inches and 0.060 inches
Second Undercut Width:
Between 0.056 inches and 0.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.125 inches
Second Hole Diameter:
0.125 inches
Distance From Centerline Of Hole To End Of Pin:
0.625 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
2.250 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
35.0 rockwell c and 40.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140 or steel comp 4145 or steel comp 5147 or steel comp 6150 or steel comp 8642 or steel comp 8645
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
