رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Storage Battery Lead
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
0.590 inches
MRC:
The center to center distance between the terminal holes.AGTK
Center To Center Distance Between Terminal Holes:
54.500 inches
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Terminal storage battery 1st end single conductor
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Lug terminal w/mounting hole 2nd end single conductor
MRC:
The number of strands per conductor.BLNZ
Strand Quantity Per Conductor:
1330 single conductor
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Stranded single conductor
MRC:
The designation used to describe the round stranded or round solid conductor size.CXDC
Round Conductor Size:
00 awg single conductor
MRC:
The american wire gage size of the individual strands of wire used in each stranded conductor.CXDG
Strand Awg Size Per Conductor:
30 single conductor
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the terminal lug.CXFY
Terminal Lug Style:
Right angle bolt clamp 1st end single conductor
MRC:
The polarity of the terminal as determined by the polarity of the accommodated battery post.CXGC
Terminal Polarity:
Negative both ends single conductor
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
72582-5120505 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
