رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2 and 1
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Wire lead
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.937 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
3.240 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.125 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Part no. Xw20058- (class code 4556)
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Three 0.199 in. Diameter mtg holes
MRC:
The distance between the mounting facilities.ARKQ
Mounting Facility Spacing:
Two holes 1.780 in. C to c, 1 hole 1.030 in. From centerline centered opposite first two holes
MRC:
The number of main poles included.AWTS
Main Pole Quantity:
2
MRC:
An indication of whether or not a housing in accordance with national electrical manufacturers association standard is provided.AZGP
Housing In Accordance With Nema Standard:
Not provided
MRC:
An indication of whether or not a housing is provided.AZLC
Housing:
Provided
MRC:
An indication of whether or not an end bracket mounting is provided.AZLD
End Bracket Mounting:
Provided
MRC:
The mounting facility/ies/ for which the end item is designed.AZLE
End Item Mounting Facility For Which Designed:
Motor
MRC:
The narrative expression used for indicating the configuration of the end item mounting facilities.AZMK
End Item Mounting Configuration:
Four 0.187 in. Diameter holes
MRC:
The spacing between the end item mounting facilities.AZML
End Item Mounting Facility Spacing:
Spaced on 1.250 in. By 1.250 in. Centers
