رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
External locking flange
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.062 inches inside left corner
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.062 inches inside right corner
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.875 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 4.623 inches and 4.625 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 2.985 inches and 2.987 inches
Left Side Flange Thickness:
0.188 inches
Right Side Flange Thickness:
0.219 inches
Distance Between Flanges:
Between 0.375 inches and 0.377 inches
End To Flange Distance:
0.562 inches
Smallest External Anchor Flange Radius:
2.250 inches
Largest External Anchor Flange Radius:
2.438 inches
Distance Below Centerline:
0.250 inches
Distance From End:
0.219 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
45.0 degrees inside left corner
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
45.0 degrees inside right corner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, class 416, cond h federal specification single material response
