رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Spade cylinder
TXT
وصف:
Line Actuating Cylinder Assembly
First End Outside Diameter:
2.50 inches all working ends
Second End Outside Diameter:
2.50 inches all working ends
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.50 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
4.50 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
1.510 inches and 1.530 inches all working ends
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
1.510 inches and 1.530 inches all working ends
First End Thickness At Mounting Holes:
6.00 inches largest working end
Second End Thickness At Mounting Holes:
4.25 inches smallest working end
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
Between 45.04 inches and 45.22 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
78.13 inches
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
3200.0 pounds per square inch
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
Ring type all working ends
MRC:
An indication of the similarity of the piston rod ends.CLLP
Piston Rod End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second piston rod end.CLLQ
Second Piston Rod End Style:
Ring type
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
First rod end has (1) threaded hole with .375-16 unc-2b threading. The second rod end has (2) threaded holes, (1) with .375-16 unc-2b threading and the other (1) has .250-28 unf-2b threading.
