رقم الجزء 30175PIECE5

Rod End Connector

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 9.14 and 12.339 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
30175piece5
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
001573851

معلومات الجزء
Rod end relieved to 0.312 in od by 0.125 in. Lg; black enamel finish not applied to rod end id or od; pivot hole cbore 0.192 in. Diameter by 0.094 in dp; pivot hole centerline 0.312 in. From bottom edge; second pivot hole identical w/first pivot hole, except on a centerline 0.063 in. From bottom edge and spaced 0.360 in. From rear surface of rod end; rod end bore on centerline located 0.2167 in. Min 0.2207 in. Maximum from pivot hole face w/0 the cbore, and spaced 0.187 in. From bottom edge; both pivot hole cbores located on same surface; black paint 39, bausch and lomb optical co; p/0 telescope mark 90 mod. 0

NSN
رقم المخزون الوطني:
5340-00-157-3851 5340001573851
TXT
وصف:
Rod End Connector
INC
INC
رمز اسم العنصر:
03439
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.125 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABHC
Overall Width:
0.437 inches
MRC:
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.AKYC
Rod Connection Bore Diameter:
Between 0.1890 inches and 0.1896 inches
MRC:
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.AKYG
Rod Connection Bore Depth:
0.187 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
0.531 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.CTHX
Overall Height:
Between 0.373 inches and 0.379 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector

{lang[cimilar]} Rod End Connectors

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى