رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Flexible Drive Shaft
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.544 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.055 inches err-100
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.075 inches err-100
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
63.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.537 inches and 0.551 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
1.120 inches
MRC:
The element,compound,or mixture of which the shaft is fabricated.ANBM
Shaft Material:
Steel
MRC:
A designation indicating the size by which the item is commercially known and/or identified.APGG
Size Designator:
1.880 in. Porm 0.010 in. Dia
MRC:
Indicates the type of unit.APQB
Unit Type:
Wire wound
MRC:
Indicates the type of end.APTD
End Type:
Threaded female
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
1.870 inches diameter err-100
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
1.890 inches diameter err-100
MRC:
The number of unthreaded securing holes provided.CFRC
Err Default:
Err default
MRC:
Indicates the location of the unthreaded securing hole(s) on the item.CFRD
Err Default:
Err default
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.THDS
Thread Size And Series/type Designator:
1-3/4 in.-12
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.THDS
Thread Size And Series/type Designator:
Unf
