رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Spacer, metal
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 8.520 inches and 8.580 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 2.610 inches and 2.670 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.075 inches and 0.105 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Conversion coat per mil-c-5541, class 1a. Item has 5 holes .196 dia; 1st hole located .50 in from rt end & 1.6 up from bottom; 2nd hole located on same center line & 2.97 to the left of1st hole; 3rd hole located 2.998 to left of 2nd hole & 1.352 below the center line of 2nd hole; 4th hole is located 4.746 left of 2nd hole & .842 below center line of 2nd hole; 5th hole located 4.928 to left of 2nd hole & .784 above center of 2nd hole.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 or aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, t6 federal specification 1st material response or qq-a-250/11, t4 federal specification 2nd material response or qq-a-250/8, h3 federal specification 3rd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
