رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Ship Propulsion Shaft
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.750 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
2.8125 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.561 inches and 0.5625 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
14.000 feet
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.250 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
0.542 feet
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
2.250 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.561 inches and 0.5625 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
Between 0.281 inches and 0.284 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
Between 0.281 inches and 0.284 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
1
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Smooth machined
MRC:
Indicates the type of unit.APQB
Unit Type:
Outboard shaft
MRC:
The structural characteristic of the item.ARQS
Construction:
Solid
MRC:
The number of threads per specific measurement scale.AZRW
Thread Quantity:
5 per inch
MRC:
Indicates the location at which the item is to be used.BPJZ
Usage Location:
Outboard
MRC:
The design of the forward end.CPHM
Forward End Design:
Tapered
MRC:
An indication of whether or not a forward end keyway is provided.CPJF
Forward End Keyway:
Provided
MRC:
An indication of whether or not an after end keyway is provided.CPJG
After End Keyway:
Provided
MRC:
The design of the forward end coupling.CPJH
Forward End Coupling Design:
Detachable
MRC:
Indicates the type of forward end coupling provided.CPJJ
Forward End Coupling Type:
Flange
MRC:
The length of a straight line which passes through the center of the forward end coupling,and terminates at the outside circumference.CPJK
Forward End Coupling Outside Diameter:
Between 10.495 inches and 10.500 inches
MRC:
A measurement of the longest dimension of the forward end coupling,in distinction from width.CPJL
Forward End Coupling Length:
0.667 feet
MRC:
A measurement of the longest dimension of the tapered portion of the forward end,in distinction from width.CPNC
Forward End Taper Length:
0.459 feet
MRC:
An indication of whether or not a threaded forward end is included.CPNF
Threaded Forward End:
Included
MRC:
The length of a straight line which passes through the center of the largest surface of the forward end,and terminates at the circumference.CPNG
Forward End Major Diameter:
1.750 inches
MRC:
The number of threads on the forward end of the item,measured on a line parallel to the thread axis.CPNH
Forward End Thread Quantity:
5 per inch
MRC:
A measurement of the longest dimension of the threaded portion of the forward end.CPNJ
Forward End Thread Length:
1.750 inches
MRC:
The design of the after end.CPTC
After End Design:
Tapered
MRC:
An indication of whether or not a threaded after end is included.CPTD
Threaded After End:
Included
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the forward end tapered portion,and terminates at the circumference.CPTT
Forward End Taper Major Diameter:
2.250 inches
MRC:
The amount of taper of the item.CTKF
Taper:
0.750 per foot in inches
MRC:
The amount of taper of the forward end of the item.CTMS
Forward End Taper:
0.750 per foot in inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, coorision resistant, armco type 17-4 ph, condition h-1150
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, coorision resistant, armco type 17-4 ph, condition h-1150
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
