رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Automatic saw with pusher type barfeed
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
208.0 pounds per hour wet or 230.0 pounds per hour wet or 460.0 pounds per hour wet or 575.0 pounds per hour wet
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
5.000
MRC:
Indicates the type of cut for which the item is designed.BWLS
Cut Type For Which Designed:
Wet
MRC:
The minimum and maximum limits of the cutting speed.BWMZ
Cutting Speed Range:
+60.0/+425.0 feet per minute
MRC:
Designates the rectangular cross-sectional size of the material accommodated by the item.BZZN
Rectangular Material Cross-sectional Size Accommodated:
+16.000/+17.000 inches
MRC:
A measurement of the round cross-sectional diameter of the material accommodated by the item.BZZP
Round Material Cross-sectional Diameter Accommodated:
16.000 inches
MRC:
A measurement of the longest dimension of the cutting blade,in distinction from width.BZZQ
Cutting Blade Length:
180.000 inches
MRC:
A measurement taken at right angles to the length of the cutting blade,in distinction from thickness.BZZR
Cutting Blade Width:
1.250 inches
MRC:
A measurement of the smallest dimension of a cutting blade,in distinction from length or width.BZZS
Cutting Blade Thickness:
0.042 inches
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Capacity for rectangular and round is at 90 deg; weight capaci type 2000 lbs; blade guide rollers and carbide inserts; blade tension manual with indicator; bandwheel size 20 in; vise automatic air; blade drive 7 1/2 hp, 3mph; sawing force 30 - 120 lb; sawing feed variable, hydraulic; coolant capaci type 15 gal; hydraulic capaci type 3/4 gal; hydraulic drive 1/3hp motor; work height 26 in; barfeed projection .125 in to 48 in; remnant end 17 in; bunding 9 in x 17 x standard; shipping wieght 3, 300 lbs; machine dimensions 90 in wide x 93 in deep x 86 in high
