رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4 all ends
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
3895-01-331-8560
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Manual
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Round with holes all ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange all ends
MRC:
Designates the size of the valve.CCFG
Valve Size:
2.500 inches
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
150.0 pounds per square inch 1st response600.0 pounds per square inch 2nd response
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
7.000 inches all ends
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.875 inches all ends
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.750 inches all ends
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
5.500 inches all ends
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised straight all ends
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.062 inches all ends
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
3.562 inches all ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 844 bodycopper alloy 844 flow control deviceplastic polytetrafluoroethylene seatcopper alloy 694 stem
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Steam 1st responsewater-oil-gas 2nd response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Err-090
