رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Sleeve Bearing Half
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.2400 inches and 0.2600 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.2490 inches and 2.2510 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
3.0670 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 2.8764 inches and 2.8794 inches
Left Flange Outside Diameter:
Between 3.8770 inches and 3.9710 inches
Right Flange Outside Diameter:
Between 3.8770 inches and 3.9710 inches
Left Flange Width:
Between 0.1010 inches and 0.1030 inches
Right Flange Width:
Between 0.1010 inches and 0.1030 inches
MRC:
The distance,measured along a straight line parallel to the longitudinal axis of the bearing,from the center of the aperture to the left end of the bearing.AGKD
Distance From Centerline Of Opening To Left End Of Bearing:
1.1140 inches and 1.1360 inches first
MRC:
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.AGKH
Lubricant Accommodation Style:
Grooved circular
MRC:
A measurement from the outer surface of an item to the outermost point of the locking lug.AGKT
Locking Lug Height:
Between 0.0450 inches and 0.0550 inches
MRC:
The distance,measured along a straight line parallel to the longitudinal axis of the lug,from one edge to the other.AGKU
Locking Lug Length:
Between 0.1900 inches and 0.2200 inches
MRC:
The distance,measured along a straight line,perpendicular to the longitudinal axis of the lug,from one edge to the other.AGKV
Locking Lug Width:
Between 0.1750 inches and 0.1800 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round left flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round right flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square right flange outside left corner
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
2 hole
MRC:
The angle formed by the centerline of the bearing and the centerline of two holes not in the same plane.CTLF
Hole Spacing Angle:
35.0 degrees
MRC:
Indicates the location and number of grooves on the surface of the item.CTMQ
Surface Groove Location And Quantity:
1 internal
Distance From Lug End To End Of Bearing:
Between 0.4435 inches and 0.4530 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy inner layer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1010 outer layer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response outer layer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae 49 assn standard single material response inner layer
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Tin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
18d half sleeve, external flanges both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Half sleeve, external flanges both ends
